CDM Series Chain drives
CDM-1-PLP
-
Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101‑2; and for daily ventilation
-
With motor electronics controlled via microprocessor
-
High‑speed function (HS) for especially fast opening windows in case of fire (SHEV)
-
Low running noises thanks to the innovative acoustic decoupling of the drive components
-
Special chain stabilisation and centred chain outlet
-
Compact design thanks to triple deflection of the chain
-
Use of a highly efficient, wear-free brushless motor
-
Relief of pressure on window gasket after closing process
-
Programmable drive functions and different drive parameters
-
Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)
Approvals / Certificates
Designs and technical data
| CDM-1-PLP | CDM-1-PLP | CDM-1000-0600-1-PLP | CDM-1000-0800-1-PLP | CDM-1000-1000-1-PLP | |
|---|---|---|---|---|---|
| Supply | Configuration dependent | 24 V DC / ±15 % / 2 A | 24 V DC / ±15 % / 2.5 A | 24 V DC / ±15 % / 3 A | |
| Duty cycle | Variable designs possible | 30 % (ON: 3 min. / OFF: 7 min.) | 30 % (ON: 3 min. / OFF: 7 min.) | 30 % (ON: 3 min. / OFF: 7 min.) | 30 % (ON: 3 min. / OFF: 7 min.) |
| Force of pressure | 1000 N | 1000 N | 1000 N | 1000 N | |
| Tensile force | 1000 N | 1000 N | 1000 N | 1000 N | |
| Nominal locking force | 3500 N | 3500 N | 3500 N | 3500 N | |
| Service life | > 20000 double strokes | > 20000 double strokes | > 20000 double strokes | > 20000 double strokes | |
| Stroke | - | 600 mm | 800 mm | 1000 mm | |
| OPEN running speed | 7 mm/s | 7 mm/s | 7 mm/s | 7 mm/s | |
| OPEN running speed - SHEV | Configuration dependent | 11.5 mm/s | 15 mm/s | 18.5 mm/s | |
| CLOSED running speed | 5 mm/s | 5 mm/s | 5 mm/s | 5 mm/s | |
|
Show more information
|
|||||
| Request & Compare |
CDM-1-PLP |
CDM-1-PLP
|
CDM-1000-0600-1-PLP
|
CDM-1000-0800-1-PLP
|
CDM-1000-1000-1-PLP
|
| Configure now | |||||
The matching bracket for CDM-1-PLP
Please note: To install the drives, you will need 1x frame bracket and 1x sash bracket. Additional washers and fastening materials may be required for these brackets. Please contact your D+H partner for this.
