CDM Series Chain drives
CDM-5-BSY+
-
Can be used for openings for smoke ventilation; D+H Euro SHEV in accordance with EN 12101‑2; and for daily natural ventilation
-
With BSY+ motor and synchronised electronics controlled via microprocessor
-
Option of up to 4 drives in one synchronous group
-
Low running noises thanks to the innovative acoustic decoupling of the drive components
-
Direct control via 230 V AC
-
Special chain stabilisation and centred chain outlet
-
Compact design thanks to triple deflection of the chain
-
Use of a highly efficient, wear-free brushless motor
-
Relief of pressure on window gasket after closing process
-
Programmable drive functions and different drive parameters
-
Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)
Designs and technical data
CDM-5-BSY+ | CDM-5-BSY+ | |
---|---|---|
Supply | 120 ... 230 V AC / +10 % ... -10 % / 50 ... 60 Hz Configurable | |
Performance | Variable designs possible | 80 W / 85 VA Configurable |
Duty cycle | 30 % (ON: 3 min. / OFF: 7 min.) Configurable | |
Force of pressure | 1000 N Configurable | |
Tensile force | 1000 N Configurable | |
Nominal locking force | 3500 N Configurable | |
Service life | > 20000 double strokes Configurable | |
Stroke | Configurable Configurable | |
OPEN running speed | 8 mm/s Configurable | |
brick.label.Duration.openRunningSpeedSHEVminMax | Configuration dependent Configurable | |
Show more information
|
||
Request & Compare |
CDM-5-BSY+ |
CDM-5-BSY+
|
Configure now |
The matching bracket for CDM-5-BSY+
Please note: To install the drives, you will need 1x frame bracket and 1x sash bracket. Additional washers and fastening materials may be required for these brackets. Please contact your D+H partner for this.